DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
©
2024 DJI All Rights Reserved.
49
• Users can also charge the remote controller using the DJI USB-C Power Adapter (100W)
included in the DJI Matrice 3D Series Charging Kit (sold separately).
• Fully discharge and charge the remote controller every three months. The battery
depletes when stored for an extended period of time.
7. Touchscreen: Touch the screen to operate the remote controller. Note that the touchscreen
is not waterproof. Operate with caution.
8. Customizable C1/C2 Buttons: C1 button is used to switch the wide-angle camera and zoom
camera view by default. C2 button is used to switch the map and camera view by default.
Run DJI Pilot 2 and enter camera view. Tap > to configure the functions of these
buttons.
Preparing the Remote Controller
Charging
Charge the remote controller to activate the internal battery before rst time use.
The remote controller cannot be powered on before activating the internal battery.
To Next Page
Loading...
