Model WQC-30 8.2 Printing with external printer
-
168
-
(c) Printing memory data with data memory function
You can save the measurement values in the field and print it later. >>“5.8 Checking, printing and
erasing memory data”
(i) Printing specific memory data
Steps for printing specific memory data
Operation Screen example
①
Go to [Memory Data Display Screen]
…
Press
on the control panel in the
[Measurement Screen].
(In pH/temperature measurement
mode)
[Memory Data Display Screen]
②
Calling by data number
…
Number in the first digit
flashes. Set the data number to call.
• Press
or on the
control panel to move the flashing digit.
• Press to change the flashing number.
③
Checking memory data
…
The measurement, temperature,
data and time corresponding the called data number in
②
are
shown.
④
Printing memory data
…
Press
on the control
panel two seconds or longer. The memory data shown in the
screen is output to the external printer (optional).
⑤
Reverting
…
Press on the control panel.
To Next Page
Loading...
Need help?
General