DKK-TOA WQC-30 User Manual

Model WQC-30 3. Name and Function of Each Part
- 21 -
(Continued)
Number Name
Notation
in the manual
Function
18 MODE symbol • Illuminates when switching the turbidity measurement units
(NTU, mg/L).
• Illuminates when switching the dissolved oxygen measuremen
t
units (mg/L, %).
19 etc. symbol • illuminates when performing settings such as auto power of
f
cancellation etc.
20 ATC/MTC symbol • Illuminates when setting the temperature compensation metho
d
(“ATC”, “OFF”) of electrical conductivity.
21 C. symbol • Illuminates when executing turbidity span calibration.
22 No. symbol • Illuminates when setting the data number.
23 SAL. symbol • Illuminates when salinity correction for dissolved oxyge
n
measurement is ON.
• Illuminates when salinity correction for dissolved oxyge
n
measurement is set.
24 INT. symbol • Displays the execution state (illuminated) or standby state
(blinking) of the interval memory which records measure
d
values at a set period.
>>“7.3 (1) Key points concerning interval memory”
• Turns off when interval memory is released.
25 ATM. symbol • Illuminates when atmospheric correction for dissolved oxyge
n
measurements is ON.
• Illuminates when atmospheric pressure correction for dissolve
d
oxygen measurements is set.
26 CLOCK symbol • Illuminates when performing clock adjustment.

DKK-TOA WQC-30 Specifications

General

Brand	DKK-TOA
Model	WQC-30
Category	Measuring Instruments
Language	English