Dodge ZB 2005 - Page 14

VECI LABEL
DESCRIPTION
All models have a Vehicle Emission Control Infor-
mation (VECI) Label. Chrysler permanently attaches
the label in the engine compartment. It cannot be
removed without defacing information and destroying
the label.
The label contains the vehicle’s emission specifica-
tions and vacuum hose routings. All hoses must be
connected and routed according to the label.
VEHICLE IDENTIFICATION
NUMBER
DESCRIPTION
The Vehicle Identification Number (VIN) is located
on the upper left corner of the instrument panel,
near the left windshield pillar (Fig. 3). The VIN con-
sists of 17 characters in a combination of letters and
numbers that provide specific information about the
vehicle. Refer to VIN Code Breakdown table for
decoding information.
VIN CODE BREAKDOWN
POSITION INTERPRETATION CODE = DESCRIPTION
1 Country of Origin 1 = Manufactured By DaimlerChrysler Corpora-
tion
2 Make B = Dodge
3 Vehicle Type 3 = Passenger Car
4 Passenger Safety J = Restraint System Air Bags Front Next Gen-
eration Multi-Stage
5 Car Line Z = ZB/SRT-10 passenger car
6 Series 6 = Sport
7 Body Style 5 = 2 Door Convertible
8 Engine Z = 8.3L V10 Cyl. SFI Gasoline
9 Check Digit 0 through 9 or X
10 Model Year 5 = 2005
11 Assembly Plant V = Conner Ave. Assembly
12 through 17 Sequence Number 6 digit number assigned by assembly plant.
Fig. 3 VEHICLE IDENTIFICATION NUMBER
1 - RIVET
2 - VEHICLE IDENTIFICATION NUMBER (VIN)
3 - BODY ASSEMBLY
ZB INTRODUCTION 9