TEST ACTION APPLICABILITY
3 Turn the ignition off.
Disconnect the BCM C4 and C3 harness connectors.
Measure the resistance of the Ignition Switch using the following values:
Key Out: 20140 - 22460 ohms
Key In: 7790 - 8810 ohms
Accessory: 3131 - 3564 ohms
Unlock: 1472 - 1764 ohms
Run: 539 - 767 ohms
Did the Ignition Switch resistance measure within specifications for each position?
All
Yes → Replace and program the Body Control Module in accordance
with the Service Information.
Perform BODY VERIFICATION TEST - VER 1.
No → Replace the Ignition Switch in accordance with the Service
Information.
Perform BODY VERIFICATION TEST - VER 1.
243
IGNITION, POWER, ACCESSORY
BCM - IGNITION MUX SWITCH INPUT MISMATCH — Continued
To Next Page
Loading...
