TEST ACTION APPLICABILITY
3 Disconnect the Body Control Module C3 and C4 connectors.
Measure the resistance between the Passenger Door Switch Mux circuit and the
Passenger Door Switch Return circuits in the BCM C3 and C5 connectors.
Is the resistance below 200.0 ohms?
All
Yes → Go To 4
No → Go To 8
4 Disconnect the Body Control Module C3 and C4 connectors.
Disconnect the Passenger Door Lock Switch connector.
Measure the resistance between the Passenger Door Switch Mux circuit and the
Passenger Door Switch Return circuit in the BCM C3 and C5 connectors.
Is the resistance below 200 ohms?
All
Yes → Go To 5
No → Replace the Passenger Door Lock Switch.
Perform BODY VERIFICATION TEST - VER 1.
5 Disconnect the Body Control Module C3 and C4 connectors.
Disconnect the Passenger Interior Door Handle Switch connector.
Measure the resistance between the Passenger Door Switch Mux circuit and the
Passenger Door Switch Return circuit in the BCM C3 and C5 connectors.
Is the resistance below 200 ohms?
All
Yes → Go To 6
No → Replace the Passenger Interior Door Handle Switch.
Perform BODY VERIFICATION TEST - VER 1.
6 Disconnect the Body Control Module C3 and C4 connectors.
Disconnect the Passenger Interior Door Handle Switch connector.
Measure the resistance between the Passenger Door Switch Mux circuit and the
Passenger Door Switch Return circuit in the BCM C3 and C5 connectors.
Is the resistance below 200 ohms?
All
Yes → Go To 7
No → Replace the Passenger Exterior Door Handle Switch.
Perform BODY VERIFICATION TEST - VER 1.
7 If there are no possible causes remaining, view repair. All
Repair
Repair the Passenger Door Switch Mux wire for a short to the
Passenger Door Switch Return wire.
Perform BODY VERIFICATION TEST - VER 1.
8 If there are no possible causes remaining, view repair. All
Repair
Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
311
POWER DOOR LOCKS/RKE
PASSENGER DOOR LOCK CIRCUIT SHORT TO GROUND — Continued
To Next Page
Loading...
