TEST ACTION APPLICABILITY
3 Turn the ignition off.
NOTE: The Passenger Window Down Relay is located left of the steering
column and taped to the harness.
Remove the Passenger Window Down Relay.
Disconnect the BCM C3 harness connector.
Measure the Voltage between ground and the Passenger Window Down Relay
Control circuit.
Is there any voltage present?
All
Yes → Repair the Passenger Window Down Relay Control circuit for a
short to Battery.
Perform BODY VERIFICATION TEST - VER 1.
No → Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
352
POWER WINDOWS
PASSENGER WINDOW DOWN RELAY COIL SHORT TO BATTERY —
Continued
To Next Page
Loading...
