Dodge ZB 2005 - Page 1745

TEST ACTION APPLICABILITY
3 Turn the ignition off.
Remove the Passenger Window Up Relay.
Disconnect the BCM C2 harness connector.
Measure the resistance between ground and the Passenger Window Up Relay
Control circuit.
Is the resistance below 1000.0 ohms?
All
Yes → Repair the PassengerWindow Up Relay Controlcircuit for ashort
to ground.
Perform BODY VERIFICATION TEST - VER 1.
No → Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
364
POWER WINDOWS
PASSENGER WINDOW UP SHORT TO GROUND — Continued