To diagnose a bent hub, (Refer to 5 - BRAKES/HY-
DRAULIC/MECHANICAL/ROTORS - DIAGNOSIS
AND TESTING).
REMOVAL
NOTE: Review all Warnings and Cautions. (Refer to
2 - SUSPENSION - WARNING).
(1) Raise vehicle. (Refer to LUBRICATION &
MAINTENANCE/HOISTING - STANDARD PROCE-
DURE)
(2) Remove wheel and tire assembly. (Refer to 22 -
TIRES/WHEELS - REMOVAL)
(3) Remove brake caliper from knuckle and hang
out of way, then remove brake rotor. (Refer to 5 -
BRAKES/HYDRAULIC/MECHANICAL/ROTOR -
REMOVAL)
(4) Remove bolt fastening ABS wheel speed sensor
head to steering knuckle (Fig. 2). Remove sensor
head from knuckle.
(5) Remove bolt retaining ABS tone wheel to hub
and bearing (Fig. 3).
(6) Remove ABS tone wheel (Fig. 3).
(7) Remove hub and bearing mounting bolts (Fig.
4).
(8) Remove hub and bearing assembly from
knuckle.
Fig. 2 Front Wheel Speed Sensor Mounting
1 - KNUCKLE
2 - WHEEL SPEED SENSOR
3 - MOUNTING BOLT
Fig. 3 Tone Wheel Mounting
1 - SEAL
2 - HUB AND BEARING
3 - KNUCKLE
4 - TONE WHEEL
5 - MOUNTING BOLT
Fig. 4 Hub And Bearing Mounting Bolts
1 - KNUCKLE
2 - HUB AND BEARING
3 - MOUNTING BOLTS
2 - 6 FRONT SUSPENSION ZB
HUB / BEARING (Continued)
To Next Page
Loading...
