Dodge ZB 2005 - Page 6

INTRODUCTION
TABLE OF CONTENTS
page page
BODY CODE PLATE
DESCRIPTION ..........................1
E-MARK LABEL
DESCRIPTION ..........................1
FASTENER IDENTIFICATION
DESCRIPTION ..........................2
FASTENER USAGE
DESCRIPTION
FASTENER USAGE .....................4
THREADED HOLE REPAIR ...............4
INTERNATIONAL SYMBOLS
DESCRIPTION ..........................4
MANUFACTURE PLATE
DESCRIPTION ..........................5
METRIC SYSTEM
DESCRIPTION ..........................5
TORQUE REFERENCES
DESCRIPTION ..........................7
VECI LABEL
DESCRIPTION ..........................9
VEHICLE IDENTIFICATION NUMBER
DESCRIPTION ..........................9
VEHICLE CERTIFICATION LABEL
DESCRIPTION .........................10
BODY CODE PLATE
DESCRIPTION
This vehicle does not require a Body Code Plate
due to limited optional equipment and colors.
E-MARK LABEL
DESCRIPTION
An E-mark Label (Fig. 1) is located on the rear
shut face of the driver’s door. The label contains the
following information:
• Date of Manufacture
• Month-Day-Hour (MDH)
• Vehicle Identification Number (VIN)
• Country Codes
• Regulation Number
• Regulation Amendment Number
• Approval Number
Fig. 1 E-MARK LABEL
1 - COUNTRY CODE
2 - REGULATION NUMBER
3 - APPROVAL NUMBER
4 - AMENDMENT NUMBER
ZB INTRODUCTION 1