Characteristics and function of the handles
Mechanical GUARD Slimline rosette set
For handles without a reading field
the access authorisation can be
controlled just with a locking
cylinder.
The door can be opened with the
lever handle if the locking cylinder
is un
locked.
This handle is also available without
a hole for a cylinder. The door can
always be opened with the lever
handle in this case.
GUARD Wideline set reading on one side
Handles with a reading field on one
side control access from outside.
Only p
eople with a corresponding
authorised transponder can activate
the outer lever handle and open the
door from outside.
The door can be opened from the
purely mechanical side with the
lever handle without special
authorisation.
The handles are also available
with
a cylinder hole for the additional
use of a locking cylinder.
To Next Page
Loading...