DOM GUARD - GUARD Compact Wideline Set Reading on One Side

Scope of supply
47
GUARD Compact Wideline set reading on one side
• Cover Wideline Compact outside
• Assembly profile Wideline Compact with electronic circuit
• Lever handle rosette Wideline inside
• Assembly profile lever handle rosette Wideline inside without electronic
circuit with lever handle
• 2 covers cylinder rosette Wideline
• 2 assembly profiles cylinder rosette Wideline
• Outer lever handle with lever handle attachment screw (M5 x 50)
• Spindle of suitable length
• adapter sleeves where necessary (see page 52)
• 2 lithium batteries, 1.5 V, AAA (inserted in battery compartment on delivery)
• Attachment material:
− 2 threaded bushes (catch sleeves)
− 3 threaded bushes (head sleeves)
− 4 long screws (M5 x 30 to M5 x 90, depending on door leaf thickness in
order)
− 8 short screws (M5 x 12)
The short screws which are supplied are only suitable for metal doors
with pre
-cut M5 threads. You can obtain suitable screws for doors made
of different
material via specialist retailers.
The screws must be of the same length as the screws supplied and the
heads must be uniform. The head of the short screw must be wider than
the drill hole (5.5
mm). It may have a maximum diameter of 9.8 mm and
a maximum he
ight of 4 mm.

Consult a specialist retailer for advice about suitable short screws for
your door.
You can pre-drill the screwing points in order to guarantee safe
screwing.