manual and manufacturer information
Mutually applicable documents
The following types of documents in particular are applicable:
• Assembly and operating instructions from third-party suppliers such as the
manufacturer of the lock or the door
• Declarations of conformity or incorporation
• Instructions about device functions, conditions and signalling
• Programming instructions for the programming medium used
Observe and follow the information from the applicable documents.
Our general terms and conditions do in principle apply. Warranty claims and
liability claims in the event of personal injury or material damage are always
ruled out if they can be traced back to one or more of the following causes:
• Inappropriate use of the handle
• Failure to heed the information in these instructions
• Incorrect assembly
• Repairs which are carried out incorrectly
• Disaster situations due to outside influences and force majeure
This documentation may not be reproduced either in whole or in part, stored or
transmitted, disclosed or translated in any form or by any means without the
prior written consent of DOM Sicherheitstechnik GmbH & Co. KG.
This documentation is updated at regular intervals. The publisher is always
grateful to receive information about any errors or suggestions regarding this
documentation.
© DOM Sicherheitstechnik GmbH & Co. KG, Wesselinger Strasse 10–16,
50321 Brühl, Germany
DOM Sicherheitstechnik GmbH & Co. KG
Abteilung Produktmanagement
Wesselinger Straße 10–16
D-50321 Brühl