The GUARD family handles are used for access control in buildings. The
access control is based on RFID technology (radio-frequency identification).
Only transponders with the corresponding authorisation (authorised
transponders) enable the door to be opened for a time and period which can
be set.
For handles with a reading field on one side, it is always possible to open the
door from the purely mechanical side.
The handles can also be supplied as purely mechanical ones. With the
mechanical variants access is cleared via the lever handle in a conventional
way.
The handles are splash proof in line with IP54.
In line with the declaration of conformity and certificates for the handle in
combination with the door lock and the panic bar where appropriate in
accordance with DIN EN 179 and DIN EN 1125 the handles are suitable as
closures for emergency exits and escape and rescue routes.
The declaration of conformity of DOM Sicherheitstechnik GmbH & Co.KG or
the corresponding lock/panic bar manufacturer must be checked prior to
assembly of the handle of the corresponding lock or panic bar where
appropriate.
The handles are suitable for sheet steel fire doors, tubular frames and wood of
the fire protection classifications T39, T60 and T90 (in preparation).
The handles can be supplied for doors with the following characteristics:
• Door leaf thickness from 36 to 116 mm (in eight stages)
• Cylinder hole: Clearances of 55 mm to 94 mm for different cylinder profiles
• Right and left hand doors
• Wood, metal, plastic and glass doors
To Next Page
Loading...