Use adapter sleeves for smaller spindle hubs
The adapter sleeves for spindles with edge lengths of 7 mm, 8 mm and 8.5
mm are supplied in two forms.
• Adapter sleeves for use on electronic handles (shorter form)
• Adapter sleeves for use of mechanical handles (longer form)
The attachment of adapter sleeves for handles on the outside door and inside
door is also different.
• The attachment of the adapter sleeves to electronic handles on the outside
is described from page 67 onwards.
• The attachment of the adapter sleeves to mechanical handles on the
outside is described from page 68 onwards.
• The attachment of the adapter sleeves to electronic handles on the inside is
described from page 70 onwards.
• The attachment of the adapter sleeves to mechanical handles on the inside
is described from page 69 onwards.
The length of the spindle which is supplied is matched to the thickness
of the door leaf stated with the order.
Ensure that the spindle is of the correct length as described from
page
64 onwards.
To Next Page
Loading...