Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n 129
Tests
If all components are operational, touch the button (4). The automatic test
will start.
If a component is not operational, touch the button (5).
The walk-through mode will start.
The components (6) are polled one after the other.
The buttons (7) are used to document whether the check passed.
The automatic test starts after all the checks in the walk-through mode are
complete.
35083
Button Meaning
Check passed
Check failed
35085
6
7
9
8