120 Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n
Operation
7.11.2 Exporting the screen contents
The screen contents can be exported to a USB mass storage device as a
screenshot.
► Touch the Export screenshot button in the main menu bar.
The screenshot will be saved as a ".png" file.
7.11.3 Exporting trends and data
In the standby mode, the following data can be exported to a USB mass storage
device:
– System test results
– Logbook
Selection from the following time periods is possible:
– Last case
– Today
–All
– Alarm logbook
– Trends
1. Open the Trends/Data dialog.
2. Touch the Export tab (1).
3. Touch the respective button (2).
The data will be saved as a ".txt" file.
7.12 Other settings
7.12.1 Switching the breathing system warmer on or off
The breathing system warmer can be switched off in special situations (e.g., for
intentional reduction of the body temperature of the patient).
1. Open the System setup dialog.
35980
1
2