Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n 183
Configuration
– Advanced neonatal support
– Expert view
Trial licenses for these options are time-limited.
An activation code is linked with the serial number of the respective device and
cannot be transferred. The activation codes can either be loaded from a USB mass
storage device or entered manually.
► Open the System setup > Licenses/Options > Licenses/Options page (1).
Loading the activation code from a USB mass storage device
Prerequisite: A USB mass storage device with valid licenses is connected to the
USB port.
► Touch the Load from USB button (3).
The activation codes are read and displayed in the list (5).
Entering the activation code
1. Touch the Enter code button (4).
2. Enter the activation code and confirm with OK.
The license is displayed in the list (5).
Activating the licensed software option
The licensed software options must be activated as follows before they become
available:
1. Select the corresponding license from the list (5).
2. Touch the Activate button (2) and confirm.
3. After activating all desired licenses, restart the device.
36022
1
3
1
2
5
4
To Next Page
Loading...
Need help?
General
