Vigor2926 Series User’s Guide
8
WAN links for Channel 5, 6 and 7 are provided for router-borne application such as TR-069.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 5, 6 or 7 to configure your router.
Available settings are explained as follows:
Item Description
Multi-VLAN Channel 5/6/7
Enable – Click it to enable the configuration of this channel.
Disable –Click it to disable the configuration of this channel.
WAN Type The connections and interfaces created in every channel may
select a specific WAN type to be built upon. In the
Multi-VLAN application, only the Ethernet WAN type is
available. The user will be able to select the physical WAN
interface the channel shall use here.
To Next Page
Loading...
Need help?
General
