Draytek Vigor2926L User Manual

Vigor2926 Series User’s Guide
546
5. Check Allow management from the Internet to set management access control and
click OK.
6. Open WAN>>Internet Access. Use the drop down list of Access Mode on WAN1 to select
MPoA (RFC1483/2684). Then, click Details Page.
7. Click Specify an IP address. Type correct WAN IP address, subnet mask and gateway IP
address for your CPE. Then click OK.

Draytek Vigor2926L Specifications

General

Brand	Draytek
Model	Vigor2926L
Category	Network Router
Language	English