DSC Neo User Manual

Section 6: Programming Worksheets
o 7 – Not Used
o 8 – Bell Squawk on Away Arm/Disarm
[018] System Options 6
Description on page 90
o 1 – Test Transmission Exception
o 2 – Real-Time Bypass Reporting
o 3 – Not Used
o 4 – Not Used
o 5 – Keypad Buzzer Alarm
o 6 – Not Used
o 7 – Exit Delay Restart
CP-01
R 7 – Exit Delay Restart
o 8 – AC Fail Trouble Beeps
EN
R 8 – AC Fail Trouble Beeps
[019] System Options 7
Description on page 91
o 1 – Audible Wireless Zone Fault
o 2 – Latching Troubles
EN
R 2 – Latching Troubles
o 3 – Not Used
o 4 – R-Button
o 5 – Audible Bus Fault
o 6 – Duress Code
R 7 – Temperature in Celsius
o 8 – Reset After Zone Activation
[020] System Options 8
Description on page 91
o 1 – Access Code Entry During Entry Delay
o 2 – EU Entry Procedure
EN
R 2 – EU Entry Procedure
o 3 – [*][8] Access While Armed
o 4 – Remote Reset
o 5 – Engineer's Reset
o 6 – Keyswitch Disarming During Entry Delay
o 7 – Installer Access and DLS
EN
R 7 – Installer Access and DLS
o 8 – Troubles Inhibits Arming
- 147 -

DSC Neo Specifications

General

Model	DSC Neo
Category	Security System
Partitions	Up to 8
Type	Hybrid Security System
Zones	Up to 128 zones
Communication	Cellular, IP
Compatibility	PowerG wireless sensors
Remote Access	Yes, via app
PGMs	4
Wireless Range	Up to 2 km with PowerG
Event Buffer	1000 events
Wireless Frequency	433 MHz, 868 MHz
Power Supply	16.5VAC, 40VA
Battery Backup	Yes, 12VDC 7Ah
Operating Temperature	0°C to 49°C (32°F to 120°F)
Event Log	Yes