3-15
Chapter 3 Advanced Operation
10
Set the stack height sensor adjustment
knob to the scale between the rst one
and second one.
A4 +0.0/+0.0
Ready
0
11
Press the or key to set the
processing speed to [4].
Set the processing speed for cross fold to [4] or
less. Paper jam may occur depending on the
paper size when performing cross fold with
the processing speed at [4] or more.
12
Check that [D-Feed Detect] is set to [OFF].
(p.3-20)
13
Check that [Feed Interval] is set to [Normal].
(p.3-22)
Set [Feed Interval] to [Slow] when mis-feed occurs during folding operation of thick paper.
(p.3-22)
14
Set to single folding using the folding mode key.
15
Press the test key to test fold.
16
Check the nish.
To Next Page
Loading...
Need help?
General
