3-34
Chapter 3 Advanced Operation
7-15. mm/inch setting
According to the using environment, the unit used for inputting numerical values of paper size, folding
dimensions (folding stopper adjusting value), and cross folding registration can be changed.
Other Setting1/5
Feed Interval
Stack Roll Adj
Belt Convey Vol
1
Press the menu key to display [Other
Setting].
Other Setting4/5
Idling
Tone
mm/inch Setting
2
Select [mm/inch Setting] with the or
key.
mm/inch Setting
mm
3
Press the key.
At this stage [mm][inch] setting can be
changed.
4
Press the key.
The [mm/inch Setting] window is displayed.
5
Select [mm] or [inch] with the or key.
mm/inch Setting
inch
6
Press the key.
The selected item is set.
7
Press the key.
Returns to [Other Setting].
8
Press the key.
Returns to the top screen.
To Next Page
Loading...
