13
● How to Supply or Change Paper While Printing
If paper runs out during printing or when you change paper, press the “feed tray descend switch” to
lower the “feed tray”.
1. Make sure that the machine stops.
If printing is in process, press the STOP key.
2. Press the “feed tray descend switch”.
The “feed tray” is lowered for the time that the “feed tray
descend switch” is pressed.
REFERENCE:
When paper runs out or papers in the feed tray are
removed, the feed tray is automatically lowered.
3. Follow the steps 2, 3, and 4 in “How to Set Papers” (page 12).
IMPORTANT:
y When supplying different-size paper, set the “paper stacker guides“ and “paper
stopper“ again.
y When supplying paper of different quality, adjust the “feed pressure adjuster lever“ and
“separation pressure adjuster knob“.
Feed tray
descend
switch
To Next Page
Loading...
