58
■ Adjusting Paper Feed Length
● Adjusting Paper Feed Length
Paper feed length can be adjusted in 5 steps.
When no paper is fed, adjust the paper feed length by pressing the ARROW key (right).
When paper folds occur, adjust the paper feed length by pressing the ARROW key (left).
IMPORTANT:
Adjusting paper feed length may be needed depending on paper.
►How to Adjust Paper Feed Length
1. Proceed with steps 1 to 5 of the sequence described in
“Basic Printing”.
Basic Printing → See page 17.
2. Press the FUNCTION key.
3. Press the ARROW key (right) or ARROW
key (left) several times to display the PAPER FEED
LENGTH screen (Paper Feed Length setting screen).
4. Press the SELECT key.
5. Select desired paper feed length by pressing the
ARROW key (right) or ARROW key (left).
Each time the ARROW key (left or right) is pressed,
The arrow moves as follows.
→ -2 → -1 → +/-0 → +1 → +2
When no paper is fed, adjust the paper feed length by pressing the ARROW key (right).
When paper folds occur, adjust the paper feed length by pressing the ARROW key (left).
* Default setting is +/-0.
PAPER FEED LENGTH
±0
P A P E R F E E D L E N G T H
To Next Page
Loading...
