82
■ Specifications
Model name DP-J450
Model Floor stand model
Master making method Thermal digital master making
Master making interval 23 sec. (A4, 100%)
Resolution
(Pel path dir.) x
(line progression dir.)
Scan (input) resolution:300dpi×600 dpi
Print (output) resolution:300dpi×600 dpi
(Master punch density:600dpi×600dpi)
Scanning method Flat bed scanner (ADF: optional)
Optional ADF
Document weight
64 - 128gsm
Optional ADF
Capacity
100 sheets (64gsm), 85 sheets (20lb), 80 sheets (80gsm)
Printing method Stencil print
Document type Sheets, book (max. weight: 10kg)
Document size Max. 297mm×432mm
(with optional ADF: Min. 100mm×148mm)
Scanning area 291mm×426mm
Image area (max.) 290mm×422mm
(11.4’ x 16.6’)
Feeding capacity 1,250 sheets (64gsm)
(1,000 sheets (80gsm))
Height of 1,250 sheets loaded should not exceed 140mm.
Print tray capacity 1,250 sheets (64gsm)
(1,000 sheets (80gsm))
Paper size Max.: 297mm×432mm
(Main unit can feed/exit 320mm×450mm. Stacker tray does not cover
paper size larger than 297x432.)
Min.: 100mm×150mm
(50mm×150mm is possible with some limitations including no vertical
registration adjustment, attaching plastic guide on separator etc.)
Paper weight 53gsm - 210gsm (45kg-180kg)
13lb (Bond) – 110b (Index)
Print speed 60 - 120 ppm (3-steps )
100%
Margin adjust 94%
Preset reduction/enlargement: 70, 81, 86, 115, 122, 141%
Custom scaling: 50 - 200% (by 1% increment)
<Inch size spec>
100%
Margin adjust 94%
Preset reduction/enlargement: 50, 64, 77, 121, 129, 154%
Custom scaling: 50 - 200% (by 1% increment)
Vertical: Electrical +/-15mm Print position
adjustment
Horizontal: Manual +/-10mm
Image mode Text (default), Photo, Text/Photo
To Next Page
Loading...
