30
■ Adjusting Darkness
● Master Darkness
Master darkness can be adjusted in 5 steps.
When the color of the document is light:
→ adjust the master darkness darker by pressing the ARROW key (right).
When the color of the documents is dark:
→ adjust the master darkness lighter by pressing the ARROW key (left).
IMPORTANT:
Set master darkness before master making.
When master darkness is changed, start from master making.
►How to Set Master Darkness
1. Proceed with steps 1 to 5 of the sequence described in “Basic Printing”.
“Basic Printing”. → See page 17.
2. Press the FUNCTION key.
3. Press the ARROW key (right) several
times to display the MASTER DARKNESS screen
(Master Darkness setting screen).
4. Press the SELECT key.
5. Select the desired MASTER DARKNESS by
pressing the ARROW key (right) or ARROW
key (left). Each time the ARROW key (left or right)
is pressed, the arrow moves as follows.
→ -2 → -1 → +/-0 → +1 → +2
● When the color of the document is light,
adjust the master darkness darker by pressing
the ARROW key (right).
MASTER DARKNESS
±0
M A S T E R D A R K N E S S
To Next Page
Loading...
Need help?
General