70
■ Replacing Drum Unit
● Replacing Drum Unit
● Avoid pressing and damaging the drum surface with fingers etc. It can stain your clothes,
and the warp in the drum surface may cause bad prints.
● Always place the drum unit on flat and stable surface. Otherwise, the drum surface may
be damaged or warped and may cause bad prints.
►How to Replace Drum Unit
1. Press and hold the “JOG switch” until he drum comes
to a stop with a beep.
2. Open the “front cover”.
3. Pull out the “drum unit” towards you while holding the
“drum unit handle” until it comes to a stop.
● Do not touch the drum or rollers when you
operate the JOG switch.
● Do not put your hands or fingers inside the
machine while it is operating. Your hands may
be pulled in or nipped.
WARNING
To Next Page
Loading...
