42
►How to Set Multiple Printing
1. Proceed with steps 1 to 5 of the sequence described in
“Basic Printing”.
Basic Printing → See page 17.
2. Press the FUNCTION key.
3. Press the ARROW key (right) several
times to display the MULTI EXPOSURE
screen (Multi Printing setting screen).
4. Press the SELECT key.
5. Select the desired MULTI EXPOSURE by
pressing the ARROW key (right) or
ARROW key (left).
Each time the ARROW key (left or right) is pressed,
the arrow moves as follows.
→ OFF → 2-UP → 4-UP → 8-UP → 2 IN 1
REFERENCE:
● If an optional ADF is not installed, “2 IN 1” is not displayed.
● If an optional ADF is installed, “2 IN 1” can be selected.
● Default setting is OFF.
6. Press the SELECT key.
The desired exposure is set.
MULTI EXPOSURE
OFF
M U L T I E X P O S U R E
→ O F F
To Next Page
Loading...
