1-1
Chapter1 Before Use
Chapter 1 Before Use
1. Features of This Machine
DSC-10/60i can be used with six units connected maximally, and can per-
form a large amount of collation work.
Paper is fed by using air belt suction method, and can be processed at a
high speed and properly without being damaged.
The following two paper processing modes are available.
[Block Mode]
Paper can be loaded while the machine is being operated to reduce operation time.
[Processing Mode]
Five types of collation methods (normal mode, alternate mode, interleaf mode 1, interleaf mode 2, and
intelligent feed) can be selected.
PC CONTROLLER(Option)(*
1
)
The DSC-10/60i can be operated on the PC monitor by installing the PC CONTROLLER to the PC in use.
(*
1
) The PC CONTROLLER is needed to use this machine.
To Next Page
Loading...
