2-20
Chapter 2 Operations
8-2. Alternate Mode
This mode is appropriate when using thick paper for the cover of bound set.
• When setting to eject paper to the left side, of the paper feed trays stacked with paper, paper is fed from
the topmost tray or the tray below.
• When setting to eject paper to the right side, of the paper feed trays stacked with paper, paper is fed from
the bottommost tray or the tray above.
• Normally, paper will be fed with priority from the topmost tray (bottommost tray if ejected to the right
side). When paper on this tray runs out, paper will be fed automatically from the next tray (tray above if
ejected to the right side).
Paper on other trays will be fed in order.
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10 10 10 10
1010 10
10
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Tower A Tower B Tower A Tower B
<Example of using trays 9 and 10 when paper ejection is set to right side>
<Example of using trays 1 and 2 when paper ejection is set to left side>
Tower A Tower B Tower A Tower B
Paper is fed from rst tray.
when paper on rst tray runs out.
Paper is fed from 10th tray. Paper is fed from 9th tray
when paper on 10th tray runs out.
Paper is fed from second tray
To Next Page
Loading...
Need help?
General