Duplo DSC-10/60i - Double-Feed Sensor

64 pages

To Next Page

To Previous Page

4-3

Chapter 4 Cleaning the Machine

1-5. Double-Feed Sensor

Blow air through the vent hole to clean

the sensor.

Main Page

Safety Precautions7
- Power Supply7
- Operating Environment8
- Maintenance / Other9
- WARNING / CAUTION Labels10
- Table of Contents13
Chapter 1 Before Use15
Features of this Machine15
Names and Operation of Parts16
Names and Operation of Control Panel18
Accessory Parts19
Options20
Precautions on Use of Emergency Stop Switch20
Chapter 2 Operations21
Operation Procedures21
Power on22
Adjusting the Parts22
- Adjusting the Position of the Sub-Guide22
- Adjusting the Position of the Reject Tray Stopper23
- Adjusting the Height of the Level Sensor23
- Adjusting the Separating Air24
- Adjusting the Height of the Separator24
- Adjusting the Strength of Separating Air25
- Adjusting the Suction Box Shutter Bar25
Loading the Paper26
- Precautions on Loading Paper26
- Direction of Printed Side When Loading and Ejecting Paper26
- Loading Paper in Normal Collation Operations27
- Loading Paper in Collation Operations with Cover Insertions28
- Using the Paper Guide31
- Using the Extension Tray33
Pc Controller34
- Making Basic Setting34
- Making Detailed Settings34
- Setting the Paper Feed Tray34
- Setting the LUL-HM34
Selecting the Paper Eject Direction35
Functions of Block Mode and Their Use36
- Structure of Block Mode36
- Example of Using the 1/2 Mode36
- Example of Using the 1/3 Mode37
- Example of Using the 1/4 Mode38
Functions of Processing Mode and Their Use39
- Normal Mode39
- Alternate Mode40
- Interleaf Mode41
Collation42
- Checking the Paper Feeding42
- Start/Stop of Collation43
Waiting Mode44
- When the Waiting Mode Is Activated44
- Canceling Waiting Mode45
Double-Feed Detection Function46
- What Is Double-Feed Detection Function46
- Double-Feed Detection Position46
Using the LUL-HM47
- Hand Marry47
- Hand Feed48
Chapter 3 Troubleshooting49
When Monitor Lamp Lights up49
- When the Door Error Lamp Lights up49
- When the Conveyance Path Jam Lamp Lights up50
- When the Double-Feed, Mis-Feed, and Jam Lamps Blink Simultaneously52
Countermeasures Taken for Jam at Paper Feed Inlet53
Troubleshooting Guide54
Chapter 4 Cleaning the Machine57
Cleaning Parts57
- Cleaning the Suction Belt57
- Cleaning the Vertical Conveyance Belt57
- Cleaning the Cconveyance Belt of the Horizontal Conveyance Section58
- Cleaning the Conveyance Belt of the LUL-HM58
- Double-Feed Sensor59
Chapter 5 Appendix61
Specifications61

Duplo DSC-10/60i - Double-Feed Sensor

Table of Contents

Related product manuals