DURAG D-ISC 100 P 2 User Manual

2 | Safety
D-ISC 100 x xx2
13
2.4 Designated use
The Universal control unit D‑ISC100 parameterises, monitors
and controls DURAG sensors.
The D‑ISC100 - Universal control unit is
not suitable …
● for use in atmospheres saturated with water vapour
● for use in potentially explosive atmospheres
● for climbing or standing on!
WARNING
Danger when using other than for the designated application!
Any use other than or beyond the designated use of the
D‑ISC100 - Universal control unit can lead to hazardous
situations.
There is a risk of personal injury and material damage.
▶ Only ever operate the device in compliance with the paramet-
ers stated on the type label and in 13 Technical data [}146]
Fault-free and safe operation of this product depends on appro-
priate transport, correct storage, installation and assembly, as
well as careful operation and maintenance by qualified person-
nel.

DURAG D-ISC 100 P 2 Specifications

General

Brand	DURAG
Model	D-ISC 100 P 2
Category	Control Unit
Language	English