DURAG D-ISC 100 P 2 User Manual

5 | Basic operation of the D-ISC 100
72
D-ISC 100 x xx2
5.2.4 Menus, structure and navigation
There are various menus for the configuration of:
● The display
● D‑ISC100
● Connected sensors
● Used modules
Specific parameter
Menu: 1
Status: S1.3:Normal measurement
Menu
\\
User mode
Specific parameter
Display setup
System setup
Channel setup
Login / Logout
:
:
:
:
:
:
:
About D-ISC 100
E
Fig.5.7: Menu selection Haupt-
menüdrw_disc100_Display_0001-0_Statusan-
zeige DO0
Pressing the
key from a measured value display opens up the
main menu.
From here you can switch to the various different sections of the
menu (details and examples for this can be seen further below).
Menus contain many levels within their structure. The menus are
nested alongside and within each other.
Fig.5.8: Menu – navigation
The keys used for moving back and forth between the displays
are shown in the Fig.5.8.
Brief description of the menu
navigation
The basic operation of the keypad and display is quick and easy
to explain:
1.
Pressing the
key takes you from the display of the meas-
ured values to the menu display, for example.
2.
The downward
or upward arrow keys can be used to se-
lect a menu item. Selected menu items are highlighted with a
black bar.
3.
The
key can be used to select the highlighted menu item
and to go to the corresponding sub-menu.
4.
To go back to the next level, press the
key.

DURAG D-ISC 100 P 2 Specifications

General

Brand	DURAG
Model	D-ISC 100 P 2
Category	Control Unit
Language	English