Programming
282 Service Instructions 755 A/756 A - 00.0 - 02/2019
Information
The programs in the seam sequence template (9) contain programs that
represent common seam patterns.
A seam sequence can contain up to 8 seam programs. Once a seam
sequence is full, the arrows between seam sequence
template and seam sequence to be created will disappear.
At least one pocket program MUST remain in the seam sequence.
If a pocket program is positioned via Drag and Drop, the left half of the
display will show the seam pattern of the pocket program.
The pocket programs will be stored in the seam sequence in the order in
which they were added to the seam sequence.
No. Symbols Description
⑨
Seam sequence template
• Sequence template has been selected (blue)
• Call up a previously created seam sequence
(yellow)
â‘©
Seam sequence to be created
⑪
Available pocket program slot
• Quick access to pocket programs
• Pocket programs already in use are highlighted
in blue
â‘«
Help
⑬
• Delete a pocket program from seam sequence:
via drag and drop
• Delete all pocket programs: with a tap
To Next Page
Loading...
Need help?
General
