Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 283
Selecting pocket programs from the seam sequence template
To select a pocket program from the seam sequence template:
1. Use Drag and Drop to drag any pocket programs you do not need from
the sequence to be created (10) to the trash OR tap on the trash
to delete all pocket programs.
 The pocket programs are deleted from the sequence.
2. Use Drag and Drop to drag the desired pocket program from the
template to an available pocket program slot.
 The display switches to Select program.
Fig. 267: Selecting pocket programs from the seam sequence template
3. Select the desired pocket program slot.
 To scroll up and down the list of pocket programs, press the buttons
and .
4. Press the button to save the setting and return to the previous
level.
Important
The preset program is copied to the selected pocket program slot,
deleting the previous program.
5. Select additional preset programs as described above and add them
to the sequence.
To Next Page
Loading...
Need help?
General
