DURKOPP ADLER 756 A User Manual

Programming
332 Service Instructions 755 A/756 A - 00.0 - 02/2019
To set the transport clamp return:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Set waiting position of transport clamp
 The display switches to Waiting position of transport
clamp.
Fig. 312: Setting waiting position of transport clamp
To set the waiting position of the transport clamp:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Symbols Meaning
Waiting position of transport clamp On/Off
Set up to waiting pos. of transport clamp
• 1 mm - 515 mm

DURKOPP ADLER 756 A Specifications

General

Brand	DURKOPP ADLER
Model	756 A
Category	Sewing Machine
Language	English