Programming
360 Service Instructions 755 A/756 A - 00.0 - 02/2019
Adjust transport clamp
The display switches to Adjust transport clamp.
Fig. 331: Set transport clamp
To set the transport clamp:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Symbol Meaning
Lower transport clamp automatically On/Off
Set delayed lifting of transport clamp
•0ms - 1000ms
Set transport clamp speed to waiting position
• 10% - 100%
Set transport clamp speed to corner knife
• 10% - 100%
Set waiting time until transport clamp moves to seam begin.
• Return transport delayed
•0ms - 1000ms
Automatic transport clamp return On/Off
• is set in the program parameters p. 331
To Next Page
Loading...
