DURKOPP ADLER 756 A

Programming
374 Service Instructions 755 A/756 A - 00.0 - 02/2019
To adjust the corner knives:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Set offset angle seam begin./seam end
Fig. 342: Set offset angle seam begin./seam end
Offset corner knife at seam end left zero  p. 374
• only for configuration: multi-functional corner knife station
• 0° - 30°
Set corner knife correction seam end
• -99.9 mm - 99.9 mm
Offset corner knife at seam end right zero  p. 374
• only for configuration: multi-functional corner knife station
• 0° - 30°
Symbols Meaning