D 4.7 6
D_4.7_01_GB.fm 6-34
After starting
To increase the engine speed:
- Set the RPM regulator (1) to medium
speed.
- Switch the drive lever (2) to position 1
(slightly moving it from the central po-
sition).
m
Let the paver finisher warm up for ca. 5
minutes if the engine is cold. For this
purpose set the two-stage change
switch (3) to neutral position.
Element2_konv_Rad_656.bmp/Element3a_konv_Rad_656.bmp
1
2
F0102_A1.EPS
3
To Next Page
Loading...