Dynapac F 161 W - Maintenance Intervals; Points of Maintenance; Chain Tightness (Drive) - (1); Drive Shaft (2)

F 7.3 2
F_7.3_01_GB.fm 2-6
1.1 Maintenance intervals
No.
Interval
Points of maintenance Remark
10 50
100 250 500
1000 / year
2000 / 2 years
as required
1
q
- Chain tightness (drive) -
Inspection
q - Chain tightness (drive) - setting
2
q
- Drive shaft
oil level check
q - Drive shaft topping up the oil
q - Drive shaft oil change
3
q
- Air pressure (drive wheels) -
check
q
- Air pressure (drive wheels) -
adjust
4
q
- Lubrication points -
lubrication of axle stubs
q
- Lubrication points -
lubrication of steering
q
- Lubrication points -
lubrication of swing axle
q
- Lubrication points -
lubrication of swing axle
Maintenance q
Maintenance during run-in period g