F 6.1 4
F_6.1_01_GB.fm 4-8
Suction/return flow hydraulic filter (2)
Replace the filter cartridges if the (A) and
(B) maintenance indicators reach the
red mark.
When changing the hydraulic oil, the fil-
ters also need to be changed.
- Unscrew the lid of the filter housing on
the hydraulic tank and replace the fil-
ter cartridge.
A
Do not clean and never use the filter
again! Always fit a new filter.
m
When changing the hydraulic oil also
change the filter.
m
Check the seal after changing the filter!
Hydtank_alt2.bmp
A
B
To Next Page
Loading...