C 1.2 3
C_1.2_01_GB.fm 3-12
.
Operation Switch Buttons
- Disabling the interlocking of operation
- Close the hopper halves.
- Engage both hopper transport safe-
guards.
- Lift the screed.
- Insert the transportation safeguards of
the hopper!
A
Only in case of not connected
remote control
- Turn the preselecting regulator to ze-
ro.
- Move the drive lever forward.
- The levelling cylinders
are completely extended.
- Set the drive lever to mid-position.
- Retract the screed to the basic width
of the paver.
To Next Page
Loading...