C 1.2 7
C_1.2_01_GB.fm 7-12
.
3.2 Trac
t
Operation Switch Buttons
- Disabling the interlocking of operation
- Close the hopper halves.
- Engage both hopper transport safe-
guards.
- Lift the screed.
- Insert the transportation safeguards of
the screed.
A
Only when
remote control is not connected.
- Turn the preselecting regulator to zero.
- Move the drive lever forward.
- The levelling cylinder are in fully ex-
tended position.
- Set the drive lever to mid-position.
- Retract the screed to the basic width of
the paver finisher.
To Next Page
Loading...