04/10 MN04020001Z-EN
Parameter menu (PAR)
129
PNU ID Access right
RUN
Value Description Factory setting
S2.6 813 / Parity type 0
0 = No function (inaccessible)
S2.7 814 / Communication timeout 0
0 = Not used
1 = 1 s
2 = 2 s
…255 = up to 255 s
S2.8 815 / Reset communication status
0 = Not used
1 = Resets parameter S2.1
Unit counter
S3.1
827 - - MWh counter 0.00
S3.2 828 - - Operating days [d] 0
S3.3 829 - Operating hours [h] 0
S3.4 840 - 0 - 0000 RUN counter, days -
S3.5 841 - 0 - 24 RUN counter, hours -
S3.6 842 - 0 - 0000 FLT counter: Error counter -
User Set
S4.1 830 / 0 - 15 Display contrast 15
S4.2
831 - Restore factory defaults (FS) 0
0 = Factory setting or changed value (user setting for parameter).
1 = Restores factory settings for all parameters.
S4.3 832 / Password 0000
The password protection applies to all parameters.
Password forgotten (A
Service and warranty, page 22)
0000 Deactivated
0001 -
9999
Activated, set individual password
To Next Page
Loading...
Need help?
General