5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
64 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
▶ Now, in the New POU dialog window, select the Program option under
Type of POU and then select a language (here: ST) for the block.
▶ Click on OK.
There will be four tabs at the bottom of the left pane (the "Explorer" pane)
(POUs, Data types, Visualizations, Resources) – you may need to enlarge
the pane in order to be able to see the labels.
Click on the Resources tab.
▶ In the “Explorer” pane, double-click on PLC Configuration. A dialog
window with the same name will appear.
▶ Right-click on the Configuration node on the left in order to open the
context menu.
To Next Page
Loading...
