5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com 65
▶ In the context menu, select the Append Subelement ▶ CanMaster…
option.
A new node called CanMaster[VAR] will be added under the Configuration
node on the left.
In addition, the Base parameters and CAN parameters tabs will be shown
on the right.
▶ Open the CAN parameters tab.
Set the baud rate to 50000 (select the option from the drop-down
menu).
To Next Page
Loading...
