Eaton PowerXL DH1 Series - Page 218

194
Appendix A—Description of parameters
POWERXL DH1 SERIES ADJUSTABLE FREQUENCY DRIVES MN040041EN—August 2019 www.eaton.com
Code Modbus ID Parameter Application RO/RW
P11.5.5 530 Interval 5 To Day 2,3 RW
Use this parameter to set the day of week for Interval function to stop on.
0 = Sunday
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
P11.5.6 531 Interval 5 Channel 2,3 RW
Use this parameter to assign the interval to a select time channel to store the interval time.
0 = Not used
1 = Time channel 1
2 = Time channel 2
3 = Time channel 3
P11.6.1 511 Timer 1 Duration 2,3 RW
Use this parameter to set the duration of time the timer will run when activated. (Activated by DI)
P11.6.2 532 Timer 1 Channel 2,3 RW
Use this parameter to assign the interval to a select time channel to store the timer channel.
0 = Not used
1 = Time channel 1
2 = Time channel 2
3 = Time channel 3
P11.6.3 513 Timer 2 Duration 2,3 RW
Use this parameter to set the duration of time the timer will run when activated. (Activated by DI)
P11.6.4 533 Timer 2 Channel 2,3 RW
Use this parameter to assign the interval to a select time channel to store the timer channel.
0 = Not used
1 = Time channel 1
2 = Time channel 2
3 = Time channel 3
P11.6.5 515 Timer 3 Duration 2,3 RW
Use this parameter to set the duration of time the timer will run when activated. (Activated by DI)
P11.6.6 534 Timer 3 Channel 2,3 RW
Use this parameter to assign the interval to a select time channel to store the timer channel.
0 = Not used
1 = Time channel 1
2 = Time channel 2
3 = Time channel 3
P12.1.1 2533 FB Process Data Input 1 Sel 1,2,3 RW
Use this parameter to assign the Fieldbus Data Input Selections, parameter/monitor Para ID's can be
assigned to these registers and then written over the desired Fieldbus Network Word for Process Data.
see Communication Manual MN040010EN for more details.
P12.1.2 2534 FB Process Data Input 2 Sel 1,2,3 RW
Use this parameter to assign the Fieldbus Data Input Selections, parameter/monitor Para ID's can be
assigned to these registers and then written over the desired Fieldbus Network Word for Process Data.
see Communication Manual MN040010EN for more details.
P12.1.3 2535 FB Process Data Input 3 Sel 1,2,3 RW
Use this parameter to assign the Fieldbus Data Input Selections, parameter/monitor Para ID's can be
assigned to these registers and then written over the desired Fieldbus Network Word for Process Data.
see Communication Manual MN040010EN for more details.
P12.1.4 2536 FB Process Data Input 4 Sel 1,2,3 RW
Use this parameter to assign the Fieldbus Data Input Selections, parameter/monitor Para ID's can be
assigned to these registers and then written over the desired Fieldbus Network Word for Process Data.
see Communication Manual MN040010EN for more details.
P12.1.5 2537 FB Process Data Input 5 Sel 1,2,3 RW
Use this parameter to assign the Fieldbus Data Input Selections, parameter/monitor Para ID's can be
assigned to these registers and then written over the desired Fieldbus Network Word for Process Data.
see Communication Manual MN040010EN for more details.