Eaton PowerXL DH1 Series - Page 226

202
Appendix A—Description of parameters
POWERXL DH1 SERIES ADJUSTABLE FREQUENCY DRIVES MN040041EN—August 2019 www.eaton.com
Code Modbus ID Parameter Application RO/RW
P13.2.2 642 Motor Control Software Version 1,2,3 RO
DSP/Motor Control Software Version
P13.2.3 644 Application Software Version 1,2,3 RO
MCU/Application Software Version
P13.2.4 1714 Software Bundle Version 1,2,3 RO
Software bundle version number, this encompasses the keypad software, Motor control software and
application software.
P13.3.1 646 Brake Chopper 1,2,3 RW
This parameter is used to provide a status to indicate if the unit has a brake chopper installed in it.
P13.3.2 647 Brake Resistor Status 1,2,3 RO
The Hardware information - indication of the Brake Resistor status being connected or disconnect.
P13.3.3 648 Serial Number 1,2,3 RO
Serial Number of the drive.
P13.3.4 1270 Power Unit Serial Number 1,2,3 RO
Serial Number of the power unit.
P13.3.5 1276 Control Unit Serial Number 1,2,3 RO
Serial Number of the control unit.
P13.4.1 566 Real Time Clock 1,2,3 RW
This parameter provides the ability to see and adjust the time clock settings in the drive. Formatted in
MM.DD.YY, HH:MM:SS.
P13.4.2 582 Daylight Saving 1,2,3 RW
This parameter provides the ability to see and adjust the daylight saving time rule.
0 = Off
1 = EU
2 = US
P13.4.3 601 Total MWh Count 1,2,3 RO
Energy Consumption MWH Meter (not resettable)
P13.4.4 603 Total Power Day Count 1,2,3 RO
Total Time Power is on, Days count (not resettable)
P13.4.5 606 Total Power Hr Count 1,2,3 RO
Total time Power is on, Hr Count (not resettable)
P13.4.6 604 Trip MWh Count 1,2,3 RO
Energy Consumption MWH Meter(resettable)
P13.4.7 635 Clear Trip MWh Count 1,2,3 RW
This parameter will reset the Trip MWh count.
P13.4.8 636 Trip Power Day Count 1,2,3 RO
Total Time Power is On, Days count (resettable)
P13.4.9 637 Trip Power Hr Count 1,2,3 RO
Total time Power is on, Hr Count (resettable)
P13.4.10 639 Clear Trip Power Count 1,2,3 RW
Resets the Trip Power Counter