XS series operating manual
XS user manual v0.55 - 145 -
4 wires option for XS series and hipot function
XS108-109
Application
XS 108: 4-wire strength for instruments in the 500VA range
XS 109: 4-wire strength for instruments in the 50VA range
Content of the option
From the equipment viewpoint, the option is supplied with all its measurement accessories. Two HV
leads and a double return lead
Accessory set in the XS-108 option
CO301-xx 2-wire return cable with UHF connector
CO303-xx high voltage cable 500VA BNC HV
CO180-xx shielded high voltage cable 500VA
All these accessories can be ordered up to a maximum length of 10m.
Accessory set in the XS-109 option
CO301-xx 2-wire return cable with UHF connector
CO302-xx 50VA high voltage BNC HV cable
CO177-xx shielded 50VA high voltage cable
To Next Page
Loading...
Need help?
General
